• Xbee S2B Zigbee PRO  63mW Module

Zigbee Mesh Networking, 2.4 GHz Point-to-point, point-to-multipoint, & peer-to-peer, DSSS (Direct Sequence Spread Spectrum), Channel Capacity 16, 10-bit ADC inputs

Application Ideas:
Remotely Monitor and Control Wind Turbines
Network-Enable Wireless Access Control Points
Reduce Hotels' Energy Costs
Wireless Mesh Technology Used in Life Saving Application
Monitoring Cooking Oil in Restaurants
Automating Parking Structure Systems
Remote Building System Management
Monitoring Residential Wind Turbines
Monitor Harsh Environments
Monitoring Farm Silo Levels
Monitoring Fluid Levels at an Automobile Quick Lube Station
Measuring Tank Levels in a Brewery

The XBP24-Z7WIT-004 module is part of the XBee ZB family which provides ZigBee level interoperability with ZigBee devices from other vendors. This hardware is only compatible with other ZB XBee modules; it is not compatible with the XBee 802.15.4.

How else do the ZB XBee modules differ from 802.15.4? ZB:

  • Is compatible only with ZB family
  • Slightly longer communication distance:  400 feet and up to two miles line of sight for the 1.25 mW and 60 mW modules respectively
  • Maximum baud rate is higher at up to 1 Mbps
  • Slightly lower power consumption than 802.15.4
  • Two less A/D I/Os and two more digital I/Os than 802.15.4

The most common factor in determining whether to use ZB is the potential need to tie-in with other ZigBee-compatible networks. If this is not a requirement, 802.15.4 may be perfectly suitable for your project. Still having trouble deciding whether to use 802.15.4 or ZB? 

Because the XBee modules have 2 mm pin spacing, we recommend one of our adapter boards for each module. Our adapter boards provide several advantages to the XBee modules such breadboard-friendly standard 0.1 inch pin spacing, mounting holes, and easy-to-solder connections. Even if you are communicating point-to-point without a PC, we still recommend that you always have at least one XBee USB Adapter Board) so you can easily configure and test each XBee module prior to putting it in a point-to-point application.


  • Wire antenna
  • Cross-compatibility with other ZB modules
  • Low-power sleep modes
  • 300 ft (90 m) indoor/urban range and 2 miles (3200 m) outdoor line-of-sight range
  • Configured with API or AT commands, local or over the air
  • 10 digital I/O and (4) 10-bit ADC inputs

Adapter Boards:

  • XBee Adapter Board
  • XBee USB Adapter Board

Application Ideas:

  • Remote controlled Boe-Bot robot
  • Wireless data acquisition
  • Remote signal beacon for adventure seekers
  • Remote industrial monitoring
  • Lighting control
  • Keyless entry

Key Specifications:

  • 1200 bps – 1 Mbps interface data rate
  • 2.4 GHz frequency band (accepted world-wide)
  • Industrial temperature rating (-40C to 85C)
  • Transmit power 60 mW (+ 18 dBm)
  • Supply voltage 2.7-3.6 VDC; transmit current 205 mA; receive current 47 mA
  • Power-down current <3.5 uA
  • 3.3V CMOS UART interface level

Write a review

Please login or register to review

Xbee S2B Zigbee PRO 63mW Module

  • Product Code: XBP24-BZ7WIT-004
  • Availability: In Stock
  • Rs.1,700.00

Related Products

Electricity Energy Meter Shield

Electricity Energy Meter Shield

Energy Meter Shield allows to sense active power, reactive power, RMS voltage and current, among oth..