This GPS module with patch antenna gives the best possible position information, allowing for better performance with your simultaneous localization and mapping application, track your robot or a vehicle. With small form factor, makes it perfect for mass-market end products with stric..
The EM-406A GPS module from USGlobalSat based on the spectacular SiRF StarIII chipset. This complete module is built upon the same technology as the ET-301, but includes on-board voltage regulation, LED status indicator, battery backed RAM, and a built-in patch antenna! 6-pin interface cable include..
The LS20031 GPS receiver is a complete 10Hz GPS smart antenna receiver, that includes an embedded antenna and GPS receiver circuits. This low-cost unit outputs an astounding amount of position information 5 times a second. The receiver is based on the proven technology found in LOCOSYS 66 channel GP..
This is a very simple breakout board for the popular HMC6352. We really enjoy the simplicity and ease of use with the HMC6352. If you need simple, clean, degree resolution compass heading, this is the way to go.
Simple I2C interface
2.7 to 5.2V supply range
This external, active GPS antenna will unleash the potential of your PMB-688 GPS receiver allowing it to lock onto more satellites and increasing its accuracy. A magnetic base makes mounting easy and the 9' cable gives you ample room for placement.
Increases accuracy of PMB-688..
The Mini Gmouse GPS Receiver(RS232) is a low cost High sensitivity GPS module + Internal Antenna with PS2 Style connector. It is a Stand alone GPS receiver providing a solution that high position and speed accuracy performances as well as high sensitivity and tracking capabilities in urban con..
The LSM303DLMTR is a triple axis accelerometer combined with a triple axis magnetic sensor. This arrangement allows for the LSM303 to perform 6D orientation detection. This breakout board uses the LSM303DLMTR to give you all the data you need to feed into a microcontroller and calculate tilt-compens..
Each Position Controller uses a quadrature encoder system to reliably track the position and speed of a wheel at all times. With the included plastic encoder disk, the Position Controller has a resolution of 36 positions per rotation; this equates to approximately 0.5 inches of linear travel per pos..
The Compass Module 3-Axis HMC5883L is designed for low-field magnetic sensing with a digital interface. This compact sensor fits into small projects such as UAVs and robot navigation systems.
The sensor converts any magnetic field to a differential voltage output on 3 axes. This voltage shift is ..
The VPN1513 GPS Receiver Module provides a fully open source and customizable GPS Receiver solution for your microcontroller projects. The VPN1513 uses a SiRF Star III chipset capable of tracking up to 20 satellites. The module supports both “raw” output mode for raw NMEA 0183 strings an..
This is a breakout board for Honeywell's HMC5883L, a 3-axis digital compass. Communication with the HMC5883L is simple and all done through an I2C interface. There is no on-board regulator, so a regulated voltage of 2.16-3.6VDC should be supplied.
The breakout board includes the HMC5883L sensor a..
Freescale’s MAG3110 is a small, low-power, digital 3-axis magnetometer. The device can be used in conjunction with a 3-axis accelerometer to produce orientation independent accurate compass heading information. It features a standard I2C serial interface output and smart embedded functions. It..