Model: FS-2.2
Flex Sensor 2.2 inch for Arduino Raspberry PI. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol.
The resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on inside of bend).
Connector is 0.1" sp..
Rs.340.00
Back-ordered coming in 15 days
Model: FF-25-R
This is a piezoresistive force sensor from Tekscan. The harder you press, the lower the sensor's resistance. Pressing hard, the resistance changes from infinite to ~50k. The sensor itself is thin and flexible, but the resistance does not change while being flexed. Resistance changes only when pr..
Rs.2,650.00
Model: FF-100
This is a piezoresistive force sensor. The harder you press, the lower the sensor's resistance. Pressing hard, the resistance changes from infinite to ~300k. The sensor itself is thin and flexible, but the resistance does not change while being flexed. Resistance changes only when pressure is applie..
Rs.1,500.00
Model: FF-1
This is a piezoresistive force sensor. The harder you press, the lower the sensor's resistance. Pressing lightly, the resistance changes from infinite to ~300k. The sensor itself is thin and flexible, but the resistance does not change while being flexed. Resistance changes only when pressure is app..
Rs.1,500.00
Out Of Stock
Model: FF-25
This will allow you to demonstrate the resistive nature of the sensor with a resistor/capacitor discharge time measurement circuit; no correlations to weight are made. The resistance of the Flexiforce sensor is proportional to weight. The sensor included in the kit has a resolution of ≈ 1.6lbs. The ..
Rs.1,550.00
Model: FSR-S
This is a force sensitive resistor with a square, 1.75x1.5", sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR its resistance will be larger..
Rs.750.00
Model: FSR-2feet
This very long force sensitive resistor - over 2 feet - has a sensing area of 0.25x24". This Interlink Electronics FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied ..
Rs.1,150.00
Model: FSR-Small
This is a small force sensitive resistor. It has a 0.16" (4 mm) diameter active sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR, its ..
Rs.350.00
Model: FS-4.5
A simple flex sensor 4.5" in length. As the sensor is flexed, the resistance across the sensor increases.
The resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on inside of bend).
Connector is 0.1" spaced and bread board friendly. ..
Rs.750.00
Model: BMP085
This is a simple breakout board for the BMP085 high-precision, low-power barometric pressure sensor in retail packaging. The BMP085 offers a measuring range of 300 to 1100 hPa with an accuracy down to 0.03 hPa in ultra-high resolution mode (that's 0.25m of altitude at sea level!) It's based ..
Rs.1,425.00
-49 %
Model: BMP180
By converting the pressure measured into altitude, you have a reliable sensor for determining the height of your robot, plane or projectile!
Measuring the absolute pressure of the environment using a digital barometer such as this has some interesting applications.
Using a sensor as capabl..
Rs.180.00 Rs.350.00
New
Model: FSR0-5
This FSR will vary its resistance depending on how much pressure/force is being applied to the sensing area. The harder the force, the lower the resistance.This is a force sensitive resistor with a round, 0.5 inch diameter, sensing area. When no pressure is being applied to the FSR its resista..
Rs.500.00