-58 %
Model: DHT11-M
DHT11 Temperature and-Humidity Sensor Module for Environment sensing and monitoring, a high performance temperature and humidity sensor, ensuring high reliability and excellent stability.
The temperature is measured using a negative temperature coefficient thermistor (NTC), and the relative humid..
Rs.110.00 Rs.260.00
Model: LM35
The LM35 series are precision integrated-circuit temperature sensors, whose output voltage is linearly proportional to the Celsius (Centigrade) temperature. The LM35 thus has an advantage over linear temperature sensors calibrated in ° Kelvin, as the user is not required to subtract a large constant..
Rs.70.00
Discontinued / Retired
Model: AD592 Temperature Probe
This convenient analog temperature sensor, has attached wire leads, a submersible tip, and a performance range of -13 to +221° F (-25 to + 105° C)
..
Rs.1,600.00
New
Model: DHT11
DHT11 output calibrated digital signal. It applys exclusive digital-signal-collecting-technique and humidity sensing technology, assuring its reliability and stability. Power supply: 3.3-5.5V DCOutput signal: digital signal via 1-wire busAccuracy: humidity +-5%RH, temperature +-2CelsiusResoluti..
Rs.80.00
New
Model: DHT22
3 to 5V power and I/O2.5mA max current use during conversion (while requesting data)Good for 0-100% humidity readings with 2-5% accuracyGood for -40 to 80°C temperature readings ±0.5°C accuracyNo more than 0.5 Hz sampling rate (once every 2 seconds)Body size 27mm x 59mm x 13.5mm (1.05" x 2.32" x 0.5..
Rs.290.00
New
Model: DHT22-M
DHT22 has higher precision and can replace the expensive imported SHT10 temperature and humidity sensor.It can measure the environment temperature and humidity to meet the high demand.The product has high reliability and good stability.If it's used and combined with special sensor Arduino expansion ..
Rs.350.00
Back-ordered coming in 15 days
Model: Digital Thermometer
The DS1620 is a complete digital thermometer on a chip, capable of replacing the normal combination of temperature sensor and analog-to-digital converter in most applications. It can measure temperature in units of 0.5° Centigrade (C) from -55° C to +125° C. (In Fahrenheit (°F), units of 0.9° F and ..
Rs.480.00
New
Model: DS18B20-S
DS18B20 Waterproof stainless steel Digital Temperature Temp Sensor Probe 1MFeatures :Flexibility resistance, Better thermal conductivity.Length of Cable : 1M Size of Stainless steel sheath : 6 x 30mmPower supply range : 3.0V to 5.5VOperating temperature range : -55°C to +125°C (-67°F to +2..
Rs.140.00
Model: HS1101
Based on a unique capacitive cell, these relative humidity sensors are designed for high volume, cost sensitive applications such as office automation, automotive cabin air control, home appliances, and industrial process control systems. They are also useful in all applications where humidity compe..
Rs.890.00
Back-ordered coming in 15 days
Model: SHT15
This is a simple breakout board for the SHT15 humidity sensor from Sensirion. The SHT15 digital humidity and temperature sensor is fully calibrated and offers high precision and excellent long-term stability at low cost. The digital CMOSens Technology integrates two sensors and readout cir..
Rs.3,150.00
Model: SEN-10740
This is a board for the MLX90614 IR infrared Thermometer. The sensor is connected to an ATmega328 running at 3.3V with a STK500 (Arduino) 8MHz bootloader. Code can be loaded through the FTDI basic interface and the Arduino environment.
The MLX9061 sensor is a high precision, small size, single z..
Rs.5,850.00
Model: max6675
The MAX6675 performs cold-junction compensation and digitizes the signal from a type-K thermocouple. The data is output in a 12-bit resolution, SPI compatible, read-only format.
Working voltage: DC 3.3V to 5V
Operating Current: 50 mA
It has a 12-bit resolution providin..
Rs.290.00