Model: 28BYJ-ULN
This is 28BYJ-48 DC 5V 4 phase 5 wire stepper motor with ULN2003 driver board for arduino and raspberry pi. Make your own robot or any automated machine.
5-wire phase can drive ordinary uln2003 chip can also be connected as phase 2 may be supporting the development board, direct plug, easy to use s..
Rs.95.00
Model: A4988
A4988 is a complete microstepping motor driver with built-in translator for easy operation. This product is available in full, half, 1/4, 1/8 and 1/16 step modes operate bipolar stepper motors, output drive capacity of up to 35 V and ± 2 A. A4988 includes a fixed off-time current regulator, the regu..
Rs.73.00
Model: CNC-S
The CNC Shield V3.0 allows you to build a engraving machine, 3D printer, mini CNC and other similar devices using your Arduino. It is designed as a shield and can plug on top of an Arduino requiring no external connections and wiring. There are 4 slots on the board for plugging in stepper motor driv..
Rs.97.00
Model: DRV8825
DRV8825 Stepper Motor Microstepping Driver for CNCThe DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can b..
Rs.98.00
Out of Stock
Model: HEAT12V
It is a powerful fast Heater 12V 40W Ceramic Cartridge Specifications:Voltage: 12vPower output: 40WCore: CeramicDiameter: 6mmCartridge length: 2.3cmLead Wire Length: 100cm..
Rs.95.00
Model: LSMES
The mechanical endstop is a simple solution to a simple problem. We want to be able to detect when an X/Y/Z stage has reached its minimum or maximum. Instead of messing with flags or complicated light beam interruption, we use a mechanical switch.If we place the switch in the path of the stage, then..
Rs.70.00
Out Of Stock
Model: RAMPS1.4
RAMPS 1.4 3D Printer Controller Shield for Arduino Megait is mainly designed for the purpose of using stepper driven board. Ramps can only work when connected to its mother board Arduino Mega 2560 and A4988/DRV8825. Owing to its stability in operation and great compatibility with most 3D printer (al..
Rs.270.00
Out of Stock
Model: 3.3NEMA17
NEMA 17 Hybrid Stepper Motor 5mm Round Shaft Two Phase Four Line Stepper Motor*connector with wire Not Included, you need to arrange.Stepper motor can not be directly connected to the AC frequency or DC power supply work, and must use a dedicated stepper motor driver, which consists of pulse generat..
Rs.350.00
2 weeks
Model: JK42HS48
PRE-BOOKING ORDERStepper Motor Nema17 1.8 Degree JK42HS48-1684 - Use for robot , electronic automatic equipment , medical instrument, motion advertisements, instruments, lighting & audio equipment, printer, textile machinery, Cnc router, 3D Printer etc.Phase: 2 PhaseLead Wire (No.): 4 wireStruct..
Rs.790.00
Out of Stock
Model: TB6560
TB6560 Stepper Driver 3A CNC Router 1-axis Controller has high-performance forward and reverse driving of a two-phase bipolar stepping motor using only a clock input signal. Suitable for 2-phase Nema 17 and Nema 23 stepper motor up to 3 Ampere current rating.Operating voltage :DC 10V-35VVery easy to..
Rs.385.00
Model: TB6600
TB6600 CNC Stepper Motor Driver 4.0A 9-42V ControllerTB6600 is an easy-to-use professional stepper motor driver, which could control a two-phase stepping motor. It is compatible with Arduino and other microcontrollers that can output a 5V digital pulse signalFEATURESSupport 8 kinds of current contro..
Rs.350.00
Showing 1 to 11 of 11 (1 Pages)