Model: DRV8833
DRV8833 is a dual H-bridge motor driver IC that can be used for bidirectional control of two brushed DC motors at 2.7 V to 10.8 V. It can supply up to about 1.2 A per channel continuously and can tolerate peak currents up to 2 A per channel for a few seconds, making it an ideal driver for small moto..
Rs.80.00
Model: AMS
L293D is a typical Motor driver or Motor Driver IC which allows DC motor to drive on either direction. L293D is a 16-pin IC which can control a set of two DC motors simultaneously in any direction. It means that you can control two DC motor with a single L293D IC.In a single L293D chip there are two..
Rs.115.00
Model: L298-M
L298 Motor Driver Module, 2A Dual Channel total 4A, PWM Control for motors variable speed, with back EMF protection, versatile for Robotics Arduino Raspberry PI. It is a high voltage, high current, dual full-bridge motor driver designed to accept standard TTL logic levels and drive inductive loads s..
Rs.90.00
Model: SC-6CH-P
The Micro Maestro is the first of Pololu’s second-generation USB servo controllers. The board supports three control methods — USB for direct connection to a PC, TTL serial for use with embedded systems, and internal scripting for self-contained, host controller-free applications &m..
Rs.3,000.00
Model: MBoard
MBoard is a unique Arduino board which features onboard L298P motor driver to control 2/4 motors for wheeled robot , an XBee socket interface to connect xbee module for wireless communication, its also nRF24L01+ module interface for additional wireless option, Micro SD socket and an ATMega32U4. The ..
Rs.1,970.00
Model: A4988
A4988 is a complete microstepping motor driver with built-in translator for easy operation. This product is available in full, half, 1/4, 1/8 and 1/16 step modes operate bipolar stepper motors, output drive capacity of up to 35 V and ± 2 A. A4988 includes a fixed off-time current regulator, the regu..
Rs.73.00
Model: CNC-S
The CNC Shield V3.0 allows you to build a engraving machine, 3D printer, mini CNC and other similar devices using your Arduino. It is designed as a shield and can plug on top of an Arduino requiring no external connections and wiring. There are 4 slots on the board for plugging in stepper motor driv..
Rs.97.00
Model: DRV8825
DRV8825 Stepper Motor Microstepping Driver for CNCThe DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can b..
Rs.98.00
Out Of Stock
Model: EZX-R
EZX-R is a 2-Way Electronic Speed Control from Hitec
Features:
Microprocessor Controlled
Low Resistance
MOSFET Drive
One push set up
Two Way or One Way
Thermal Protection
Built-in on/off switch
Specification:
Input Operating Voltage Range 6~7 Cells : 7.2v - 8.4v
BEC Output..
Rs.2,750.00
Model: L293M
L293D Can control 2 DC motors. Dual mode facility to connect, either thru jumper wire on header pins or direct wires on screw terminalIt can control their direction using control lines and their speed using PWM signals.High Grade PCB, with Green Mask.Easy to plug and play screw terminals and He..
Rs.69.00
Model: 29144
The Motor Controller is our single best solution for DC motor control. This module is dependable and highly-compatible with any microcontroller that can generate a servo compatible pulse. In the simplest sense this allows a DC Motor to be controlled much like a Continuous Rotation Servo. W..
Rs.6,700.00
Out Of Stock
Model: RAMPS1.4
RAMPS 1.4 3D Printer Controller Shield for Arduino Megait is mainly designed for the purpose of using stepper driven board. Ramps can only work when connected to its mother board Arduino Mega 2560 and A4988/DRV8825. Owing to its stability in operation and great compatibility with most 3D printer (al..
Rs.270.00