Water flow sensor can be used to measure the flow of liquids - flowmeter, i.e. the consumption of liquids in industrial or domestic usage. For example you can make a robotic cocktail dispensing machine, and can use this sensors to accurately measure components like Soda, Water, etc. Water flow senso..
Have you ever wanted to control the flow of a liquid using your computer or microcontroller, but didn't know how? Well, here's how: The 12V solenoid controlled fluid valve. Simply connect a fluid source to the 3/4" threaded inlet and it will interrupt the flow until 12V is applied to the fast-on con..
This fluid pump will move 350 gallons per hour! The SEAFLO mini water pump has a heavy duty 12V, 1.5Amp motor and a tough thermoplastic body. It’s totally submersible and water-cooled (but it won’t burn out if run dry). Use this pump to make a fountain or waterfall, even water your plant..
The MagnetoPot is a contactless linear potentiometer used for liquid level and other harsh applications. This innovative sensor allows designers to retroactively assemble the sensor on the outside of pneumatic and hydraulic cylinders, which connects with the internal magnet of the cylinder. This all..
Solenoids are a great way to induce linear motion for pushing, pulling or controlling switches and levers.
According to the datasheet this solenoid is rated for 36V but they work like a charm at 12V.
We've been controlling them with the Arduino Power Driver Shield, there's even some ..
It has a throw of about 4.5mm to induce linear motion for pushing, pulling or controlling switches and levers.This smaller solenoid is designed to work directly with 5V which makes it a great match for embedded projects.
The wire lead is about 2" long and is terminated with a 2-pin JS..
Submersible Pump Motor which can be operates even from a 3 ~ 9V power supply. It can take up to 100 to 150 liters per hour with very low current consumption of 150 to 300mA. Just connect tube pipe to the motor outlet, submerge it in liquid and power it. Make sure that the liquid level is alway..
This vacuum pump really sucks! This pump operates at 12V and has enough suction for most small projects. We even used one to make our very own universal gripper using coffee grounds, balloon and some other parts.
0-16" Hg vacuum range
Free flow ranfe 12 - 15 LPM
This float switch may used to sense the level of liquid within a tank, it may actuate a pump, an indicator, an alarm, or other device.A float switch is a device used to sense the level of liquid within a tank. The switch may actuate a pump, an indicator, an alarm, or other device. Use them with hydr..
Self suction Diaphragm Water Pump R385 , Use it for aquarium, sanitizer, transfer liquid, 20 liter water jar dispenser.The R385 requires between 9 – 12V DC and between 0.5 – 0.7A and will deliver its maximum operating values when power is at the upper end of these ranges.The pump can handle pumping ..