Model: AGS-IA
The Arduino GSM Shield allows an Arduino board to connect to the internet, make/receive voice calls and send/receive SMS messages. Just plug this module onto your Arduino board, plug in a SIM card from an operator offering GPRS coverage and follow a few simple instructions to start controlling your ..
Rs.6,800.00
Model: A-wifi
The Arduino WiFi Shield connects your Arduino to the internet wirelessly. Connect it to your wireless network by following a few simple instructions to start controlling your world through the internet. As always with Arduino, every element of the platform hardware, software and documentation ..
Rs.5,490.00
Model: ESP32CAM
ESP32-CAM is a WIFI+ bluetooth dual-mode development board that uses PCB on-board antennas and cores based on ESP32 chips. It can work independently as a minimum system.ESP integrates WiFi, traditional bluetooth and BLE Beacon, with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline architecture, ..
Rs.410.00
Model: HC05-3.3v
3.3v compatible HC05 Bluetooth Master-Slave Module for Arduino, Bluetooth module SPP (Serial Port Protocol) module, designed for wireless serial connection setup. It has EDR (Enhanced Data Rate) of 3Mbps Modulation with complete 2.4GHz radio transceiver and baseband.
It uses CSR Bluecore 04-Externa..
Rs.290.00
Model: HC05
HC05 Bluetooth Master-Slave Module for Arduino, Bluetooth module SPP (Serial Port Protocol) module, designed for wireless serial connection setup. It has EDR (Enhanced Data Rate) of 3Mbps Modulation with complete 2.4GHz radio transceiver and baseband.
It uses CSR Bluecore 04-External single chip Bl..
Rs.169.00
Model: KY022
IR Receiver TSOP Module KY-022 is an Infrared receiving module adopts 1838 infrared receiving head Light resistance, strong electromagnetic interference, built-in infrared dedicated IC, can work under 500 lux light intensity Widely used in: stereo, TV, video machine, disc machine, set-top boxe..
Rs.35.00
New
Model: WEEWIFI
Wee is a WIFI module based on ESP8266 SoC with xbee form factor. So far, the most popular ESP8266 breakout version only has GPIO0 and GPIO2 routed to the header. Compared to it, Wee WIFI module is designed with a standard xBee interface and has more GPIOs available for developers. In a word, u..
Rs.770.00
Model: nM12E
It is the latest NodeMCU Board with ESP8266-12e. It comes with bigger flash size, more IO pins and a smaller board size! The NodeMcu is an open-source firmware and development kit that helps you to build your IOT product only with a few Lua script lines or directly in C through the Arduino IDE. When..
Rs.157.00
Model: RF433
Features
Range in open space(Standard Conditions) : 100 Meters
RX Receiver Frequency : 433 MHz
RX Typical Sensitivity : 105 Dbm
RX Supply Current : 3.5 mA
RX IF Frequency : 1MHz
&nb..
Rs.63.00
Model: SIM900A-M-232-TTL
SIM900A RS232 for PC or TTL microcontroller interface with DTMF active feature. The GSM/GPRS Cellular Module for Microcontrolles/ Embedded Systems/ Home automation is complete in all respect ready to plug-in interface for your microcontroller(Arduino,Raspberry pi, Atmega, PIC, Basic Stamp, 8051..
Rs.950.00
Model: SIM900A
SIM900A RS232 for PC or TTL microcontroller interface . The GSM/GPRS Cellular Module for Microcontrolles/ Embedded Systems/ Home automation is complete in all respect ready to plug-in interface for your microcontroller(Arduino,Raspberry pi, Atmega, PIC, Basic Stamp, 8051, AVR etc) with an SIM90..
Rs.690.00
Model: RF266PC1
Are you a fan of the XBee form-factor but in need of more power? Try the Synapse module! The Synapse RF266PC1 is an IEEE802.15.4 RF module running the SNAP® network operating system that is pin-compatible with sockets already designed in for Digi International’s XBee® and XBee-PR..
Rs.2,650.00