2 weeks
Model: HTC1
HTC1 HTC-1 Temperature Humidity Digital Thermo Hygrometer Meter with Clock is generally used for an incubator to monitor Real-time temperature and Humidity with daily Calender, clock and alarm system on one single large LCD screen display, features one-inch tall digital numbers which can be seen fro..
Rs.165.00
Model: TFT2.8
The Arduino 2.8”TFT Touch Shield V2 is designed for all the Arduino compatible boards. It works in 3.3V voltage level. It can be directly plugged on the Arduino and other compatible boards. It will offer display, touch and storage functions for the Arduino board.FeaturesArduino UNO Rev3 / Mega Shiel..
Rs.2,190.00
New
Model: TFT3.2
Arduino 3.2" TFT LCD Touch shield is an Arduino Mega compatible, multicolored TFT display with touch-screen and SD card socket. It is available in an Arduino MEGA shield compatible pinout for attachment. The TFT driver is based on SSD1289 with 8bit data and 4bit control interface. The touch IC is XP..
Rs.2,700.00
Out Of Stock
Model: XH-M452
Voltage: DC 12VTemperature range: -20°C to 60°CTemperature range: 0% to 100%RHControl accuracy: 0.1°C, 0.1RHDetector probe: integrated sensorOutput type: relay outputOutput capacity: up to 10AWeight: about 69g (with sensor)Size: 65*55*28mm (length*width*height) How to control the humidity:Humid..
Rs.410.00
Model: DV100A10
Digital panel mount Voltmeter Ammeter DC 100V 10A Meter-Tester-DisplayVoltage measurement range: 0.0V-100VCurrent test range: 0-999mA, 0-10APower supply range: DC4-30.0VVoltage error: ±0.1%Current error: ±1%Working current: < 20mARefresh rate: about 300mS onceDisplay mode: double three-digit 0.28..
Rs.125.00
Model: HTC2
HTC2 HTC-2 Temperature & Humidity Digital Thermo Hygrometer Meter with Alarm Clock. It has Dual Temperature sensor one for environment sensing and the other one with waterproof or moisture proof temperature probe for target sensing like inside oven, egg hatch chambers etcThis is a good product f..
Rs.340.00
Model: I2C-LCDM
I2C Module has a inbuilt PCF8574 I2C chip that converts I2C serial data to parallel data for the LCD display. These modules are currently supplied with a default I2C address of either 0x27 or 0x3F. To determine which version you have check the black I2C adaptor board on th..
Rs.47.00
Out Of Stock
Model: LCD20x4
If you want to add some visual output to your Arduino projects, you’ll need a display. If you need moderate data on display, the LCD2004 Parallel LCD Display is a quite good solution for the Arduino projects.This is a basic 20 character by 4 line display. Interface code is freely available. You will..
Rs.270.00
Out Of Stock
Model: I2C-LCD
This LCD Display utilizes an I2C interface, which means that fewer pins are necessary to use this product than would be needed with a regular 16x2 LCD Display (just four connections, VCC, GND, SDA & SCL are required). And it is backlit. I2C address is usually decimal 39, hex 0x27. These devices ..
Rs.220.00
Out Of Stock
Model: 1602-GB
This is a basic 16 character by 2 line Alphanumeric display. Black text on Green background. Utilizes the extremely common HD44780 parallel interface chipset. Includes LED backlight. Works in 4bit and 8 bit Mode.16 Characters x 2 LinesGreen BacklightHD44780 Equivalent LCD Controller/driver Built-In4..
Rs.149.00
Model: 1602-WBL
This is a basic 16 character by 2 line Alphanumeric display. white text on blue background. Utilizes the extremely common HD44780 parallel interface chipset. Includes LED backlight. Works in 4bit and 8 bit Mode.16 Characters x 2 LinesBlue BacklightHD44780 Equivalent LCD Controller/driver Built-In4-b..
Rs.115.00
Model: M-8x8
LED Matrix 8 x 8 Red with SPI Interface MAX7219.
Easy to interface to any microcontroller with SPI including Arduino.
Various libraries available. LedControl is perhaps the easiest to use.
Specifications
8 x 8 matrix
Hi Red color
3mm LEDs
Common cathode pins - easy to driv..
Rs.105.00