It is a 8 mm sized photoresistor - light dependent sensor with maximum surface area which changes resistance with the change in the ambient light exposed on the surface of the sensor. LDR (Light Dependent Resistor) is a type of photocell which finds excellent use in light sensing device application,..
The OV7670 Camera Module is a small image sensor, low operating voltage, providing all functions of a single chip of VGA camera and image processor. Through SCCB bus control, the sensor can output the whole frame, sampling, and various resolution 8 bits of data. The product VGA image..
Comes with SIP converter.
TCS3200 Color Sensor Daughterboard is a complete color detector, including a TAOS TCS3200 RGB sensor chip, white LEDs, collimator lens, and standoffs to set the optimum sensing distance. Compatible with any microcontroller. The TCS3200-DB can detect and measure a n..
Comes with SIP converter.
The TSL1401 Linescan Imaging board provides one-dimensional sight to almost any microcontroller. Compatible with any microcontroller. It is a platform suitable not only for evaluating TSL1401R imaging chip, but also for incorporation into OEM products, as well as hobbyi..
Widely used in motor speed detection, pulse count, the position limit.
Features:
Using imported groove optical coupling sensor, width 5mm.
It have the output state light, if output is high level, the lights are off. If output low level, its on.
If it covered, it will output high l..
The TSL2561 SparkFun Luminosity Sensor Breakout is a sophisticated light sensor which has a flat response across most of the visible spectrum. Unlike simpler sensors, the TSL2561 measures both infrared and visible light to better approximate the response of the human eye. And because the TSL2561 is ..
Sense different spectrums of visible light and react based on those measurements, the ISL29125 breakout board may be just what you need. The ISL29125 breakout board makes it very easy to sense and record the light intensity of the general red, green, and blue spectrums of visible light while rejecti..
The ML8511 breakout is an easy to use ultraviolet light sensor. The MP8511 UV (ultraviolet) Sensor works by outputing an analog signal in relation to the amount of UV light that’s detected. This breakout can be very handy in creating devices that warn the user of sunburn or detect the UV index..
The TSL235R light-to-frequency converter combines a silicon photodiode and a current-to-frequency converter on a single monolithic CMOS integrated circuit. The output is a square wave (50% duty cycle) with frequency directly proportional to light intensity. Because it is TTL compatible, the output a..
The TSL237 light-to-frequency converter (High Responsivity) combines a silicon photodiode and a current-to-frequency converter on a single monolithic CMOS integrated circuit. The output is a square wave (50% duty cycle) with frequency directly proportional to light intensity. Because it is TTL compa..
We use cookies to improve and personalize your browsing experience.By continuing to visit this website you agree to our use of cookies. Privacy Policy.