Model: BJ01
This is a common barrel-type power jack for DC wall supplies. These are compatible with our DC wall supplies and have a 5mm jack, with a 2.1mm center pole diameter...
Rs.10.00
Model: DGM30
30 RPM 12V DC geared motors for robotics applications. Very easy to use and available in standard size. Nut and threads on shaft to easily mount on chassis and internal threaded shaft for easy connection to wheel.
6mm shaft diameter with internal hole
125gm weight
3000RPM base motor
No-load cu..
Rs.175.00
Model: DGM45
45 RPM 12V DC geared motors for robotics applications. Very easy to use and available in standard size. Nut and threads on shaft to easily mount on chassis and internal threaded shaft for easy connection to wheel.
6mm shaft diameter with internal hole
125gm weight
3000RPM base motor
No-load cu..
Rs.175.00
Model: DCMJ
It is used to give external DC power to any device or board thru adapter or battery. ..
Rs.10.00
Model: MDCJ
DC Power Screw Male Jack adapter - 2.1mm plug. Other than many general usage, its easy to plug battery to Arduino board via this jack.If you need to connect a battery pack or wired power supply to a board that has a DC jack - this adapter will come in very handy!There is a 2.1mm DC plug on one end, ..
Rs.20.00
Model: SU095
This is DC 3V to 5V Boost Converter USB Output Mini Step up boost Power Converter Module. It has Mini PFM Control and on-board input voltage indicator. High conversion efficiency, maximum to 96%. Any DC voltage input 0.9V ~ 5V, output 5V DC voltage can be stable, with two AA batteries input to ..
Rs.40.00
Model: DHT11
DHT11 output calibrated digital signal. It applys exclusive digital-signal-collecting-technique and humidity sensing technology, assuring its reliability and stability. Power supply: 3.3-5.5V DCOutput signal: digital signal via 1-wire busAccuracy: humidity +-5%RH, temperature +-2CelsiusResoluti..
Rs.60.00
Out Of Stock
Model: DHT22
3 to 5V power and I/O2.5mA max current use during conversion (while requesting data)Good for 0-100% humidity readings with 2-5% accuracyGood for -40 to 80°C temperature readings ±0.5°C accuracyNo more than 0.5 Hz sampling rate (once every 2 seconds)Body size 27mm x 59mm x 13.5mm (1.05" x 2.32" x 0.5..
Rs.105.00
Model: DHT22-M
DHT22 has higher precision and can replace the expensive imported SHT10 temperature and humidity sensor.It can measure the environment temperature and humidity to meet the high demand.The product has high reliability and good stability.If it's used and combined with special sensor Arduino expansion ..
Rs.145.00
Back-ordered coming in 15 days
Model: Digital Thermometer
The DS1620 is a complete digital thermometer on a chip, capable of replacing the normal combination of temperature sensor and analog-to-digital converter in most applications. It can measure temperature in units of 0.5° Centigrade (C) from -55° C to +125° C. (In Fahrenheit (°F), units of 0.9° F and ..
Rs.480.00
2 weeks
Model: TPM10
Digital Thermometer can make sure you know exactly what is the ambient temperature. For Measuring temperature in Specific Places, it features a probe, LCD displays H°C when the temperature is higher than 110°C & displays L°C when the temperature is lower than -50°C.Modeling simple, elegant..
Rs.98.00
Model: DV100A10
Digital panel mount Voltmeter Ammeter DC 100V 10A Meter-Tester-DisplayVoltage measurement range: 0.0V-100VCurrent test range: 0-999mA, 0-10APower supply range: DC4-30.0VVoltage error: ±0.1%Current error: ±1%Working current: < 20mARefresh rate: about 300mS onceDisplay mode: double three-digit 0.28..
Rs.125.00