Model: DGM10
10 RPM 12V DC geared motors for robotics applications. Very easy to use and available in standard size. Nut and threads on shaft to easily mount on chassis and internal threaded shaft for easy connection it to wheel.
6mm shaft diameter with internal hole
125gm weight
3000RPM base motor
No..
Rs.175.00
Model: DGM3.5
3.5RPM 12V DC geared motors for robotics applications. Very easy to use and available in standard size. Nut and threads on shaft to easily mount on chassis and internal threaded shaft for easy connection to wheel.
6mm shaft diameter with internal hole
125gm weight
3000RPM base motor
No-load cu..
Rs.220.00
Model: DHT11-M
DHT11 Temperature and Humidity Sensor Module for Environment sensing and monitoring, a high performance temperature and humidity sensor, ensuring high reliability and excellent stability.
The temperature is measured using a negative temperature coefficient thermistor (NTC), and the relative humid..
Rs.63.00
Model: DRV8833
DRV8833 is a dual H-bridge motor driver IC that can be used for bidirectional control of two brushed DC motors at 2.7 V to 10.8 V. It can supply up to about 1.2 A per channel continuously and can tolerate peak currents up to 2 A per channel for a few seconds, making it an ideal driver for small moto..
Rs.80.00
Against Order, in 2/3 weeks
Model: EasyVR3plus
The EasyVR 3 Plus Shield for Arduino is compatible with any Arduino board. It includes the EasyVR 3 Plus module AND the Arduino Shield adapter.EasyVR 3 Plus is a multi-purpose speech recognition module designed to easily add versatile, robust and cost effective speech recognition capabilities to alm..
Rs.10,950.00
Model: ESP32CAM
ESP32-CAM is a WIFI+ bluetooth dual-mode development board that uses PCB on-board antennas and cores based on ESP32 chips. It can work independently as a minimum system.ESP integrates WiFi, traditional bluetooth and BLE Beacon, with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline architecture, ..
Rs.530.00
New
Model: ESP32cam-MB
The ESP32-CAM AI-Thinker MB programmer Shield is a shield that you attach to your ESP32-CAM board GPIOs. The programmer comes with the CH340C USB to serial chip. This allows you to program the ESP32-CAM using the USB port on the shield. The shield also comes with a RESET button. This may be useful t..
Rs.140.00
Out of Stock
Model: w5100
With this Ethernet Shield, your Arduino board can be used to connect to internet.Can be used as server or client.Directly plug puzzle board, no soldering required.Controller: W5100.This is the latest version of the Ethernet Shield.This Arduino Ethernet Shield which is based on the Wiznet W5100 Ether..
Rs.820.00
Model: FS-2.2
Flex Sensor 2.2 inch for Arduino Raspberry PI. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol.
The resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on inside of bend).
Connector is 0.1" sp..
Rs.220.00
Model: FS-4.5
A simple flex sensor 4.5" in length. As the sensor is flexed, the resistance across the sensor increases.
The resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on inside of bend).
Connector is 0.1" spaced and bread board friendly. ..
Rs.520.00
Back-ordered coming in 15 days
Model: FF-25-R
This is a piezoresistive force sensor from Tekscan. The harder you press, the lower the sensor's resistance. Pressing hard, the resistance changes from infinite to ~50k. The sensor itself is thin and flexible, but the resistance does not change while being flexed. Resistance changes only when pr..
Rs.2,650.00
Model: FF-100
This is a piezoresistive force sensor. The harder you press, the lower the sensor's resistance. Pressing hard, the resistance changes from infinite to ~300k. The sensor itself is thin and flexible, but the resistance does not change while being flexed. Resistance changes only when pressure is applie..
Rs.1,500.00