Model: HMC5833LCH
HMC5883L Magnetometer Compass Sensor Module - GY273 may be used in Application like Auto and personal navigation, UAV systems, Robotic navigation, Location-based services (LBS).A digital 3 axis Magnetometer Compass Sensor Module. A magnetometer can sense where the stro..
Rs.195.00
Model: HR202
If you project demand only Humidity sensing, this is the sensor to use. The humidity sensor module is sensitive to environmental humidity, generally used to detect ambient humidity by adjusting the potentiometer, for detecting the humidity can change the threshold ( i.e. the humidity control). The H..
Rs.90.00
Model: HS1101
Based on a unique capacitive cell, these relative humidity sensors are designed for high volume, cost sensitive applications such as office automation, automotive cabin air control, home appliances, and industrial process control systems. They are also useful in all applications where humidity compe..
Rs.890.00
Model: HT12DES
The HT 12E Encoder ICs are series of CMOS LSIs for Remote Control system applications. They are capable of Encoding 12 bit of information which consists of N address bits and 12-N data bits. Each address/data input is externally trinary programmable if bonded out.The HT 12D ICs are series of CMOS LS..
Rs.90.00
Model: HTC2
HTC2 HTC-2 Temperature & Humidity Digital Thermo Hygrometer Meter with Alarm Clock. It has Dual Temperature sensor one for environment sensing and the other one with waterproof or moisture proof temperature probe for target sensing like inside oven, egg hatch chambers etcThis is a good product f..
Rs.340.00
Back-ordered coming in 15 days
Model: SHT15
This is a simple breakout board for the SHT15 humidity sensor from Sensirion. The SHT15 digital humidity and temperature sensor is fully calibrated and offers high precision and excellent long-term stability at low cost. The digital CMOSens Technology integrates two sensors and readout cir..
Rs.3,150.00
Out Of Stock
Model: hx711
It is a specially designed for the high precision electronic scale design, with two analog input channel, the internal integration of 128 times the programmable gain amplifier. The input circuit can be configured to provide a bridge type pressure bridge (such as pressure, weighing sensor mode), is o..
Rs.35.00
Model: I2C-LCDM
I2C Module has a inbuilt PCF8574 I2C chip that converts I2C serial data to parallel data for the LCD display. These modules are currently supplied with a default I2C address of either 0x27 or 0x3F. To determine which version you have check the black I2C adaptor board on th..
Rs.47.00
Out Of Stock
Model: imaxB3
Imax B3 Balance Charger for 2S-3S Lipo Battery Pack
Specification
Input voltage: AC 110V-240V
Balance charge current: 850mA
Display: Green & Red LED
Case: Plastic
Max charge power:10W
Only charge for 2~3 series LiPo battery
Content
- IMAXRC ..
Rs.360.00
Out Of Stock
Model: B6AC
B6AC is fast battery charger, discharger, balancer and save your lithium battery with storage mode. Supports all NiMH, NiCd, Lead, LiPo, Li-ion, and LiFe batteries, and features an internal independent lithium battery balancer that allows for balance charging and discharging of 2..
Rs.1,990.00
Back-ordered coming in 15 days
Model: Fusion
The IMU 3000 breakout features a 3-axis digital gyro with programmable ranges from +-250 to +-2000 degrees/sec. In addition, it has a secondary I2C port that interfaces with a digital accelerometer to deliver a complete 6-axis sensor output from its primary I2C port. The fusion output offloads the i..
Rs.4,450.00
Model: IN4148
IN4148 Diode, the maximum current carrying capacity is 300mA it can withstand peaks up to 2A. The speciality of this diode is its fast recovery time of 8ns at a forward current of 10mA, hence this diode is used in places where fast switching are involved.Fast switching DiodePeak repetitive Reverse v..
Rs.2.00