Back-ordered coming in 15 days
Model: LilyPower
A small, but mighty power supply. This board was designed to be as small and inconspicuous as possible. Pop in a AAA battery, flip the power switch, and you will have a 5V supply to power your LilyPad circuit. Good up to 200mA. Short circuit protected.
This board has AAA battery clips but can u..
Rs.990.00
Out Of Stock
Model: LilyXBee
The LilyPad XBee is a breakout board for the popular XBee modules. Board includes easy-to-sew tabs and all the necessary power regulation to run on the LilyPad system.
LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each Lil..
Rs.925.00
Model: LSMES
The mechanical endstop is a simple solution to a simple problem. We want to be able to detect when an X/Y/Z stage has reached its minimum or maximum. Instead of messing with flags or complicated light beam interruption, we use a mechanical switch.If we place the switch in the path of the stage, then..
Rs.70.00
Model: 4CHIRL
The basic concept of 4-Channel Infrared IR Line Follower Sensor Obstacle Avoidance Module is to transmit the IR signal (radiation) in a direction and a signal is received at the IR receiver when the IR radiation bounces back from a surface of the object.This 4 channels IR reflective sensor includes ..
Rs.85.00
Model: 8LA-R
IR 8 Array Module Digital-Analog for Robot Line Following Maze Solving
The IR sensor ARRAY of 8 is important in making a LINE Follower Robots.This sensor module has 8 IR LED/phototransistor pairs mounted on a 0.375" pitch, making it a great detector for a line-following robot. Pairs of LEDs are a..
Rs.240.00
Back-ordered coming in 15 days
Model: lipo1122
3-Cell Li-Po rechargeable battery
Voltage : 11.1V (3 cell)
Current : 2200 mAh
Discharge rate : 25C / 30C / 35C (depend on stock availibility)
..
Rs.1,780.00
Model: SLP
This fluid pump will move 350 gallons per hour! The SEAFLO mini water pump has a heavy duty 12V, 1.5Amp motor and a tough thermoplastic body. It’s totally submersible and water-cooled (but it won’t burn out if run dry). Use this pump to make a fountain or waterfall, even water your plant..
Rs.1,880.00
Model: LM2596
LM2596 DC-DC Buck step down voltage regulator Converter ModuleDescription:Input voltage:4.5-30VOutput voltage:3.0-28V(Adjustable)Output current: Rated current is 2A,maximum 3A(Additional heatsink is required)Features:Conversion Efficiency: Up to 92% (output voltage higher, the higher the e..
Rs.38.00
Model: LM386M
LM386 is very useful audio amplifier module, connects 4-8 ohms speaker.Onboard LM386 Chip moduleOn-board speaker wiring Block.On-board 10K variable resistor, you can adjust the volume of the enlargeOnboard power indicator...
Rs.89.00
Model: LC10K
Load Cell 10kg for Weighing Scale Sensor Specifications:Range weight: 0-10 kgRecommended control voltage: 5-10V (maximum 10V)Dimensions: 12.7 x 12.7 x 80mmTwo holes for M5 boltsTwo holes for M4 boltsPinout wires:Red: + ExcitationWhite: - SignalBla..
Rs.90.00
Out Of Stock
Model: LC1K
Load Cell 1kg for Weighing Scale Sensor Specifications:Range weight: 0-1 kgRecommended control voltage: 5-10V (maximum 10V)Dimensions: 12.7 x 12.7 x 80mmTwo holes for M5 boltsTwo holes for M4 boltsPinout wires:Red: + ExcitationWhite: - SignalBlack: - ExcitationGreen:..
Rs.110.00
Out Of Stock
Model: LC20K
Load Cell 20kg for Weighing Scale Sensor Specifications:Range weight: 0-20 kgRecommended control voltage: 5-10V (maximum 10V)Dimensions: 12.7 x 12.7 x 80mmTwo holes for M5 boltsTwo holes for M4 boltsPinout wires:Red: + ExcitationWhite: - SignalBla..
Rs.210.00