Out Of Stock
Model: LC30K
Load Cell 30kg for Weighing Scale Sensor Specifications:Range weight: 0-30 kgRecommended control voltage: 5-10V (maximum 10V)Two holes for M5 boltsTwo holes for M4 boltsPinout wires:Red: + ExcitationWhite: - SignalBlack: - ExcitationGreen: + Signa..
Rs.220.00
Model: LC3K
Load Cell 3kg for Weighing Scale Sensor Specifications:Range weight: 0-3 kgRecommended control voltage: 5-10V (maximum 10V)Dimensions: 12.7 x 12.7 x 80mmTwo holes for M5 boltsTwo holes for M4 boltsPinout wires:Red: + ExcitationWhite: - SignalBlack: - ExcitationGreen:..
Rs.104.00
Model: LC5K
Load Cell 5kg for Weighing Scale Sensor Specifications:Range weight: 0-5 kgRecommended control voltage: 5-10V (maximum 10V)Dimensions: 12.7 x 12.7 x 80mmTwo holes for M5 boltsTwo holes for M4 boltsPinout wires:Red: + ExcitationWhite: - SignalBlack..
Rs.105.00
Model: Load50
This load sensor is the same one found in digital bathroom scales (you know, the ones you use in January for your New Year's resolutions, and then forget about a month later). This sensor can measure up to about 50kg/110 pounds...
Rs.31.00
Model: LL4CH
This Level Converter- 4 Channel features four high speed bi-directional 4 channels, allowing for safe and easy communication between devices operating at different logic levels. Recommended to use with Arduino Due, Raspberry pi and any board that has 3.3v logic levels.The board needs to be powered f..
Rs.28.00
Model: LoraRa02P
The SX1278 LoRa spread spectrum wireless module uses the LoRa series module Ra-02. The interface is compatible with the NRF24L01 module. If you want to transfer data over long distances, you can directly replace the NRF24L01. Just change the program and do not need to change the hardware design.LoRa..
Rs.400.00
Back-ordered coming in 15 days
Model: Compass_LSM303DLMTR
The LSM303DLMTR is a triple axis accelerometer combined with a triple axis magnetic sensor. This arrangement allows for the LSM303 to perform 6D orientation detection. This breakout board uses the LSM303DLMTR to give you all the data you need to feed into a microcontroller and calculate tilt-compens..
Rs.2,400.00
Back-ordered coming in 15 days
Model: MagnetoPot
The MagnetoPot is a contactless linear potentiometer used for liquid level and other harsh applications. This innovative sensor allows designers to retroactively assemble the sensor on the outside of pneumatic and hydraulic cylinders, which connects with the internal magnet of the cylinder. This all..
Rs.1,850.00
Back-ordered coming in 15 days
Model: mapple
In the past, ARM processors were notoriously unfriendly in non-professional environments due to proprietary tool chains and unfamiliar instruction sets. Because of this, they were conspicuously absent from classrooms and hobbyists’ workbenches. LeafLabs aims to change this by providing an ARM ..
Rs.4,290.00
Model: M-8x8
LED Matrix 8 x 8 Red with SPI Interface MAX7219.
Easy to interface to any microcontroller with SPI including Arduino.
Various libraries available. LedControl is perhaps the easiest to use.
Specifications
8 x 8 matrix
Hi Red color
3mm LEDs
Common cathode pins - easy to driv..
Rs.105.00
Model: MAX30100
The MAX30100 is an integrated pulse oximetry and heart-rate monitor sensor solution. It combines two LEDs, a photodetector, optimized optics, and low-noise analog signal processing to detect pulse oximetry and heart-rate signals.Key FeaturesComplete Pulse Oximeter and Heart-Rate Sensor Solution Simp..
Rs.92.00
Model: MAX30102
The MAX30102 is an integrated pulse oximetry and heart-rate monitor biosensor module. It includes internal LEDs, photodetectors, optical elements, and low-noise electronics with ambient light rejection. The MAX30102 provides a complete system solution to ease the design-in process for mobile and wea..
Rs.159.00