Search Criteria
Products meeting the search criteria
Model: uno-smd
This Arduino UNO board is Perfect for Microcontroller board autonomous project - be it Home Automation or IOT system, datalogging sensor feedback to remotely controlling devices, best board for students or real life projects.It uses an surface mount version of the Atmega328P instead of the thr..
Rs.175.00
Hot
Model: ADUnoR3
Arduino Uno Rev3 Board compatible - can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP).Arduino is an open-source physical computing platform based on a simple i/o board and a development environment that imple..
Rs.345.00
Model: ESC30A
ESC 30A BLDC Electronic Speed Controller can drive motors up to 30A current. it has high-quality MOSFETs for BLDC motor drive. Super fast microprocessor for great compatibility with all types of motors at greater efficiency.
Heat sink with high-performance heat transmission membrane for better th..
Rs.310.00
Out of Stock
Brand: Hitec
Model: D145SW
Hitec D145SW 32-Bit Wide Voltage Steel Servo - With 32-bit high resolution, ultra-response technology and wide voltage operation, the slim wing D-145SW has heavy-duty, steel gears, providing instant torque and holding power for slim aircraft and glider wings.D145SW Servo SpecificationsPerformance Sp..
Rs.4,325.00
Hot
Model: A-Nano
The Nano (arduino compatible) is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.0) . It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of..
Rs.179.00
Model: DRV8833
DRV8833 is a dual H-bridge motor driver IC that can be used for bidirectional control of two brushed DC motors at 2.7 V to 10.8 V. It can supply up to about 1.2 A per channel continuously and can tolerate peak currents up to 2 A per channel for a few seconds, making it an ideal driver for small moto..
Rs.80.00
Model: ESP32CAM
ESP32-CAM is a WIFI+ bluetooth dual-mode development board that uses PCB on-board antennas and cores based on ESP32 chips. It can work independently as a minimum system.ESP integrates WiFi, traditional bluetooth and BLE Beacon, with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline architecture, ..
Rs.530.00
New
Model: ESP32cam-MB
The ESP32-CAM AI-Thinker MB programmer Shield is a shield that you attach to your ESP32-CAM board GPIOs. The programmer comes with the CH340C USB to serial chip. This allows you to program the ESP32-CAM using the USB port on the shield. The shield also comes with a RESET button. This may be useful t..
Rs.140.00
Brand: Hitec
Model: D625
The metal D-625MW is part of the D-Series servo line, combining industry leading high-resolution, state-of-the-art ultra-response technology with a 32-bit MCU and 12-bit ADC for unprecedented programmability and flexibility, these servos deliver significantly smoother movement. The speedy, powerful ..
Rs.2,790.00
Model: D954SW
Hitec D-954SW 32-Bit, High Torque, Steel Gear ServoFeaturesProgrammable PWM Digital Amplifier32-Bit MCU with 12-Bit ADC Circuitry4096 Resolution1M Cycle Long Life PotentiometerWide Operating Voltage (4.8 ~ 8.4 Volts DC)Dual Ball Bearing Supported Output Shaft25-Tooth Output SplineCoreless Metal Brus..
Rs.7,950.00
Model: D955TW
This reliably-strong titanium-geared Hitec D-955TW 32-Bit High Torque Servo. Advancing servo technology and providing superior engineering has always been Hitec’s missionD955TW Servo SpecificationsPerformance SpecificationsOperating Voltage Range (Volts DC) 4.8V ~ 7.4VSpeed (Second @ 60°) 0.19 ~ 0.1..
Rs.8,950.00
New
Model: TFT3.2
Arduino 3.2" TFT LCD Touch shield is an Arduino Mega compatible, multicolored TFT display with touch-screen and SD card socket. It is available in an Arduino MEGA shield compatible pinout for attachment. The TFT driver is based on SSD1289 with 8bit data and 4bit control interface. The touch IC is XP..
Rs.2,700.00