Search Criteria
Products meeting the search criteria
Model: DHT11-M
DHT11 Temperature and Humidity Sensor Module for Environment sensing and monitoring, a high performance temperature and humidity sensor, ensuring high reliability and excellent stability.
The temperature is measured using a negative temperature coefficient thermistor (NTC), and the relative humid..
Rs.63.00
2 weeks
Model: HTC1
HTC1 HTC-1 Temperature Humidity Digital Thermo Hygrometer Meter with Clock is generally used for an incubator to monitor Real-time temperature and Humidity with daily Calender, clock and alarm system on one single large LCD screen display, features one-inch tall digital numbers which can be seen fro..
Rs.165.00
2 weeks
Model: MLX90614
MLX90614 Infrared Non-Contact Body Temperature Measurement Sensor Module can be used with any microcontroller that can communicate with it through it's I2C interfaceMultiple zone temperature control up to 127 sensors can be read via common 2 wiresApplication:Body temperature measurementIndustrial te..
Rs.770.00
Model: RC522
RFID RC522 Reader-Writer 13.56MHz SPI with Mifare Tags for Arduino Raspberry PI
Specifications:
Operating Current :13-26mA/DC 3.3V
Idle Current :10-13mA/DC 3.3V
Sleep Current: <80uA
Peak Current: <30mA
Operating Frequency: 13.56MHz
Supported card types: mifare1 S50、mifare1 S70, mifare..
Rs.69.00
Model: RFID125USB
This RFID card reader can read RFID card serial number and output to your computer according to the specified format, which may be used for any application including and not limited to food courts, gaming zone, shopping marts etcThe RFID card reader is simple, fast read card. Belong to standard HID ..
Rs.520.00
Model: SSR10DA
This is Solid State Relay 10A SSR-10DA with Trigger voltage 3-32 VDC Load switching voltage 24-380 VAC, it can switch current loads of up to 10A with a 3-32V DC input and a zero cross trigger control method. Each one of these relays is equipped with four screw terminals (for use with ring or f..
Rs.265.00
Model: SSR25DA
This is Solid State Relay 25A SSR-25DA with Trigger voltage 3-32 VDC Load switching voltage 24-380 VAC, it can switch current loads of up to 25A with a 3-32V DC input and a zero cross trigger control method. Each one of these relays is equipped with four screw terminals (for use with ring or f..
Rs.280.00
Out Of Stock
Model: XH-M452
Voltage: DC 12VTemperature range: -20°C to 60°CTemperature range: 0% to 100%RHControl accuracy: 0.1°C, 0.1RHDetector probe: integrated sensorOutput type: relay outputOutput capacity: up to 10AWeight: about 69g (with sensor)Size: 65*55*28mm (length*width*height) How to control the humidity:Humid..
Rs.410.00
Model: 12vSolenoid
Have you ever wanted to control the flow of a liquid using your computer or microcontroller, but didn't know how? Well, here's how: The 12V solenoid controlled fluid valve. Simply connect a fluid source to the 3/4" threaded inlet and it will interrupt the flow until 12V is applied to the fast-on con..
Rs.650.00
Model: AM2301-DHT21
AM2301 DHT21 Temperature & Humidity Sensor - Capacitive Digital.Each AM2301/ DHT21 sensor is calibrated in an extremely accurate humidity calibration chamber. It uses dedicated digital module acquisition technology and temperature and humidity sensing technology to ensure high reliabi..
Rs.360.00
Model: MG811
The CO2 (Carbon Dioxide) Gas Sensor is used in gas detection equipment for detecting Carbon Dioxide gas in home, automotive or industrial settings.Features:High sensitivity to Carbon Dioxide gasStable and long lifeSimple drive circuitApplication Ideas:Air Quality ControlFermentation Process ControlC..
Rs.2,560.00
Model: DHT22-M
DHT22 has higher precision and can replace the expensive imported SHT10 temperature and humidity sensor.It can measure the environment temperature and humidity to meet the high demand.The product has high reliability and good stability.If it's used and combined with special sensor Arduino expansion ..
Rs.125.00