Search Criteria
Products meeting the search criteria
Model: HV-S
This shield have 2 channels mechanical relays and 2 channels MOS switch, providing an easy way for applications of voltage controlling from low to high.The 3Pins breakouts make it easy to build a project or prototyping quickly, by using many existing sensor modules. And there are some wireless inter..
Rs.1,100.00
Model: IOTGO
Itead IoTgo Shield On-Board AC-DC Power Supply Module With Xbee Nrf24l01 Interface For Arduino.By using IoTgo shield, you can make some remote control home application projects with no effort.With an on-board AC-DC module, Arduino IoTgo shield can transfer AC 85~260V to DC 5V, so it can be the power..
Rs.1,690.00
Model: RF433
Features
Range in open space(Standard Conditions) : 100 Meters
RX Receiver Frequency : 433 MHz
RX Typical Sensitivity : 105 Dbm
RX Supply Current : 3.5 mA
RX IF Frequency : 1MHz
&nb..
Rs.63.00
Model: RC522
RFID RC522 Reader-Writer 13.56MHz SPI with Mifare Tags for Arduino Raspberry PI
Specifications:
Operating Current :13-26mA/DC 3.3V
Idle Current :10-13mA/DC 3.3V
Sleep Current: <80uA
Peak Current: <30mA
Operating Frequency: 13.56MHz
Supported card types: mifare1 S50、mifare1 S70, mifare..
Rs.69.00
Model: RFID125USB
This RFID card reader can read RFID card serial number and output to your computer according to the specified format, which may be used for any application including and not limited to food courts, gaming zone, shopping marts etcThe RFID card reader is simple, fast read card. Belong to standard HID ..
Rs.520.00
Model: MBoard
MBoard is a unique Arduino board which features onboard L298P motor driver to control 2/4 motors for wheeled robot , an XBee socket interface to connect xbee module for wireless communication, its also nRF24L01+ module interface for additional wireless option, Micro SD socket and an ATMega32U4. The ..
Rs.1,970.00
Out of Stock
Model: FS-IA6B
Flysky FS-IA6B RF 2.4GHz 6CH PPM output with iBus port receiver is a compact 6 channel receiver for Flysky radio models and, with a range exceeding 500 meters. This has Flysky FS-IA6B RF 2.4GHz 6ch PPM output with iBus port receiver built-in connectors which allows you to use any of the option..
Rs.1,250.00
Model: HT12DES
The HT 12E Encoder ICs are series of CMOS LSIs for Remote Control system applications. They are capable of Encoding 12 bit of information which consists of N address bits and 12-N data bits. Each address/data input is externally trinary programmable if bonded out.The HT 12D ICs are series of CMOS LS..
Rs.90.00
Model: LoraRa02P
The SX1278 LoRa spread spectrum wireless module uses the LoRa series module Ra-02. The interface is compatible with the NRF24L01 module. If you want to transfer data over long distances, you can directly replace the NRF24L01. Just change the program and do not need to change the hardware design.LoRa..
Rs.400.00
Model: NRF-A
Nrf24l01L wireless module, use NRF24l01 IC from Nordic, work at 2.4Ghz worldwild open ISM band, working data speed up to 2 Mbps, 125 channel can reach multiple channel and jumping channel needs, operation voltage 3.3-3.6V, transmit power up to 20 dBm, then sensitivity can reach -86dbm at 2..
Rs.149.00
2 weeks
Model: oled.91I2C
This OLED display Module is 0.91inch diagonal size, 128x32 pixels, with embedded controller, communicating via I2C interface.Product Description0.91 inch OLED module I2C, IICDriver IC: SSD1306Resolution: 128*32Support voltage 3.3V/5VIIC, I2C interface definition:1, GND (power supply negative)2, VCC ..
Rs.170.00
Model: RF315
The 315MHz RF link kit is consisted of transmitter and receiver, popular used for remote control. You may use the Arduino VirtualWire library for autonoumous data transfer and prepare a circuit to manually control your robot.
Frequency: 315Mhz
Modulation: ASK
Receiver Data Output: High - ..
Rs.56.00