New
Model: SHHS01
These hubs are ideal for attaching wheels, gears, or any heavy duty servo horns directly to your C1 Hitec servo spline. These aluminum servo hubs have a diameter of 1”, a width of 0.25”, and utilize the 0.77” hub pattern.Diameter - 1”Width - 0.25”C1 Hitec Spline4x 6-32 Screw Holes4x 0.14” Through-Ho..
Rs.950.00
New
Model: SHTHS01
These hubs are perfect for running a hub through a ServoBlock Kit that is directly to your C1 Hitec servo spline. These aluminum servo hubs have a length of 1”, a hub diameter of 1”, a shaft diameter of 0.5”, and utilize the 0.77” hub pattern.Length - 1”Hub Diameter - 1”Shaft Diameter - 0.5”C1 Hitec..
Rs.1,500.00
Model: ST
Servo Tester ESC Consistency Master CCPM Speed Control PPM Generator
Size: 46x32x17mm
Weight: 8g
Color: Blue
Input: DC 4.2 to 6.0V
Output: ≤15mA (5.0)
Output signal: 1.5ms±0.5ms
Adjustment Methods: Manual, Neutral, Automatic.
Features:
Small size,low power consumption,high reliability ..
Rs.92.00
New
Model: SG90
Tower Pro SG90 Continuous Rotation 360 Degree ServoThis TowerPro SG90 Continuous Rotation 360 Degree Servo Motor is special among all the available servo motors because its operation is very different from that of a standard servo. As instead of going to a specified angle, this servo will be static ..
Rs.110.00
Model: SG90
Tower Pro SG90 Servo 9-gm Mini Servo Motor for Robot Arduino Raspberry PI, rotation 180 degree, positional controlled
Specifications
Modulation: Analog
Torque: 4.8V: 25.00 oz-in (1.20 kg-cm)
Speed: 4.8V: 0.12 sec/60°
Dimensions: ..
Rs.70.00
Model: HSSC01
These couplers allow you to connect a 1/4” shaft directly to your 24 Tooth (C1) Hitec servo spline. The set screw included with each shaft coupler works well with straight or d-shafts. These servo shaft couplers have a length of 0.5”, an outer diameter of 0.42”, and an inner diameter of 0.25”.Length..
Rs.950.00
Model: SIM900A-M-232-TTL
SIM900A RS232 for PC or TTL microcontroller interface with DTMF active feature. The GSM/GPRS Cellular Module for Microcontrolles/ Embedded Systems/ Home automation is complete in all respect ready to plug-in interface for your microcontroller(Arduino,Raspberry pi, Atmega, PIC, Basic Stamp, 8051..
Rs.950.00
Model: SIM900A
SIM900A RS232 for PC or TTL microcontroller interface . The GSM/GPRS Cellular Module for Microcontrolles/ Embedded Systems/ Home automation is complete in all respect ready to plug-in interface for your microcontroller(Arduino,Raspberry pi, Atmega, PIC, Basic Stamp, 8051, AVR etc) with an SIM90..
Rs.690.00
Model: SSR10DA
This is Solid State Relay 10A SSR-10DA with Trigger voltage 3-32 VDC Load switching voltage 24-380 VAC, it can switch current loads of up to 10A with a 3-32V DC input and a zero cross trigger control method. Each one of these relays is equipped with four screw terminals (for use with ring or f..
Rs.265.00
Model: SSR25DA
This is Solid State Relay 25A SSR-25DA with Trigger voltage 3-32 VDC Load switching voltage 24-380 VAC, it can switch current loads of up to 25A with a 3-32V DC input and a zero cross trigger control method. Each one of these relays is equipped with four screw terminals (for use with ring or f..
Rs.280.00
Out Of Stock
Model: SM-M
The Sound Impact Sensor detects sound from up to 3 meters away, lending noise-activation possibilities to your project. This sensor also includes an onboard potentiometer for easy adjustment of the range of detection for the sensor. This sensor is compatible with any microcontrollers.
Featu..
Rs.49.00
Model: 28BYJ-ULN
This is 28BYJ-48 DC 5V 4 phase 5 wire stepper motor with ULN2003 driver board for arduino and raspberry pi. Make your own robot or any automated machine.
5-wire phase can drive ordinary uln2003 chip can also be connected as phase 2 may be supporting the development board, direct plug, easy to use s..
Rs.95.00