Features:
On-board MPU - 6050 integrated 6 axis motion processing chip
On-board LDO chip, support 5 V / 3.3 V voltage input
Commonly used pin have eduction, pin for the standard 2.54 mm
Module support IIC standard communication protocol, with 16 bit AD converter, 16 bits of data output
..
The ADXL335 is a small, low power, complete 3-axis accelerometer with signal conditioned voltage outputs. It can measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion, shock, or vibration. A popular model for Hand Ges..
The ADXL345 is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface.
The ADXL345 is well suit..
This is a breakout board for the ST's dual-axis LPY503AL gyro. The LPY503AL measures angular velocity along the pitch and yaw axes with a full scale of ±30°/s. Two different analog outputs are provided for both the x- and z- axes - one 1x amplified and the other 4x amplified.
..
The Hitachi H48C Tri-Axis Accelerometer is an integrated module that can sense gravitational (g) force of ±3g on three axes (X, Y, and Z). The module contains an onboard regulator to provide 3.3-volt power to the H48C, analog signal conditioning, and an MCP3204 (four channel, 12-bit) analog-to-digit..
The Freescale Semiconductor MMA7455L 3-Axis Digital Output Accelerometer is a low power, micro machined sensor capable of measuring acceleration along its X, Y, and Z axes. It offers several convenient integrated features including an analog to digital converter (ADC), digital low-pass filter, and s..
Life has its ups and downs, so why not measure them? The MPL3115A2 is a MEMS pressure sensor that provides Altitude data to within 30cm (with oversampling enabled). The sensor outputs are digitized by a high resolution 24-bit ADC and transmitted over I2C, meaning it's easy to interface with most..
This type of sensor is commonly used in many smart phones and digital cameras as a cheaper means to adjust the screen display when the device is rotated.
The 4-Directional Tilt Sensor is a perfect accelerometer replacement in those applications which may not need precise angular feedback.
Fe..
This 3-Axis Gyroscope module provides separate data values for yaw, pitch, and roll. Motion is indicated as a positive or negative value, depending on the direction of rotation. The sensor is useful in 3D simulation, virtual gaming input devices, robotics, and for remotely controlled or unpiloted ai..
The is a low cost, dual-axis thermal accelerometer capable of measuring tilt, acceleration, rotation, and vibration with a range of ±3 g. For integration into existing applications, the Memsic 2125 is electrically compatible with other popular accelerometers.
Memsic provides the 2125 in a surfac..
Applications include Mobile altimeter / barometer systems, Rate of Climb and Descent Indicator (RCDI), High altitude balloons, Height sensing, Navigation, Weather station, Altitude hold for UAVs, IMU builds, rocketry, unpiloted aircraft, remotely operated vehicles, robotics, air pressure and changes..
Perfect for all of your 2-D & 3-D seismic exploration needs with bandwidth from 10 Hz up to 240 HzBasically, it's a super low frequency microphone for the ground. Low distortion, combined with excellent specifications, provide high-fidelity data. A geophone works by translating ground ..
We use cookies to improve and personalize your browsing experience.By continuing to visit this website you agree to our use of cookies. Privacy Policy.