Itead 2.8 Inch TFT LCD Touch Shield V2

The Arduino 2.8”TFT Touch Shield V2 is designed for all the Arduino compatible boards. It works in 3.3V voltage level. It can be directly plugged on the Arduino and other compatible boards. It will offer display, touch and storage functions for the Arduino board.

Features

Arduino UNO Rev3 / Mega Shield compatible footprint

Arduino library new UTFT support

TFT Resolution : 240 x 320 pixels

Size : 2.8"

Colors : 65K

Backlight : LED

Driver IC: ILI9341

Specifications

PCB size 68.6mm X 53.3mm X 1.6mm

Power supply compatible with Arduino

RoSH Yes

Pin Connections

D8 Touch_Dout

D9 Touch_IRQ

D10 SD_CS

D11 SD_MOSI

D12 SD_MISO

D13 SD_SCK

A0 Touch_Din

A1 Touch_CLK

A3 TFT_CS

A4 TFT_WR

A5 TFT_RS

When using the Arduino 2.8 TFT Touch shield with 5V operation level development board – like the Arduino UNO, Arduino MEGA and so on, set the operation voltage level switch to 5V side.

When using the Arduino 2.8 TFT Touch shield with 3.3V operation level development board – like the Iteaduino BT, leaf maple, chipKit UNO and so on, set the operation voltage level switch to 3.3V side.