Application development using an environment based on the original Arduino™ IDE modified to support PIC32 that also still supports the original Arduino™ line. Compatible with many existing Arduino™ code examples, reference materials and other resources.

Specification:

·                     Microchip PIC32MX795F512 processor

·                     80 Mhz 32-bit MIPS

·                     512K Flash, 128K RAM

·                     83 available I/O

·                     USB 2.0 OTG controller

·                     10/100 Ethernet MAC

·                     Dual CAN controllers

·                     Provides additional memory and advanced communications peripherals

·                     Compatible with many existing Arduino code examples, reference materials and other resources

·                     Can also be programmed using Microchip's MPLAB® IDE (along with a PICkit 3)

·                     Arduino™ "Mega" form factor

·                     Compatible with many Arduino™ shields

·                     User LED

The chipKIT™ Max32™ is based on the popular Arduino™ open source hardware prototyping platform but adds the performance of the Microchip PIC32 microcontroller. The Max32 is the same form factor as the Arduino Mega board and is compatible with many Arduino™ shields as well as larger shields for use with the Mega boards. It features a USB serial port interface for connection to the IDE and can be powered via USB or an external power supply.

The Max32 board takes advantage of the powerful PIC32MX795F512 microcontroller. This microcontroller features a 32-bit MIPS processor core running at 80Mhz, 512K of flash program memory and 128K of SRAM data memory. In addition, the processor provides a USB 2 OTG controller, 10/100 Ethernet MAC and dual CAN controllers that can be accessed via add-on I/O shields.

The Max32 can be programmed using an environment based on the original Arduino™ IDE modified to support PIC32. In addition, the Max32 is fully compatible with the advanced Microchip MPLAB® IDE and the PICKit3 in-system programmer/debugger.

To download the IDE, please visit:
https://github.com/chipKIT32/chipKIT32-MAX/downloads.