Itead Arduino 3.2 Inch TFT LCD Touch Shield for Arduino Mega

Arduino 3.2" TFT LCD Touch shield is an Arduino Mega compatible, multicolored TFT display with touch-screen and SD card socket. It is available in an Arduino MEGA shield compatible pinout for attachment. The TFT driver is based on SSD1289 with 8bit data and 4bit control interface. The touch IC is XPT2046.

The Arduino 3.2" TFT LCD Touch shield can work with both 3.3V and 5V. Therefore, it can dispaly on Chipkit MAX32 as well.

Features

Arduino Mega Shield compatible footprint

Arduino library UTFT support

TFT Resolution : 240 x 320 pixels

Size : 3.2"

Colors : 65K

Backlight : LED

Driver IC: SSD1289

PCB size 79.3mm X 57.5mm X 1.6mm

Power supply compatible with Arduino Mega

RoHS Yes

Arduino Mega PIN Connection

D2 T_IRQ

D3 T_DOUT

D4 T_DIN

D5 T_CS

D6 T_CLK

D22 DB8

D23 DB9

D24 DB10

D25 DB11

D26 DB12

D27 DB13

D28 DB14

D29 DB15

D30 DB7

D31 DB6

D32 DB5

D33 DB4

D34 DB3

D35 DB2

D36 DB1

D37 DB0

D38 RS

D39 WR

D40 CS

D41 RST

D50 SD_MISO

D51 SD_MOSI

D52 SD_SCK

D53 SD_NSS

When using the Arduino 3.2 TFT Touch shield V1 with 5V operation level development board – like Arduino MEGA and so on, set the operation voltage level switch to 5V side.

When using the Arduino 3.2 TFT Touch shield V1 with 3.3V operation level development board set the operation voltage level switch to 3.3V side.