Model: CCAM5MP
The Raspberry Pi Camera Module is a custom designed add-on for Raspberry Pi. It attaches to Raspberry Pi by way of one of the small sockets on the board upper surface. This interface uses the dedicated CSi interface, designed especially for interfacing to cameras.Fully Compatible with Both the Model..
Rs.239.00
Model: RasPI-NOIR
The upgraded Raspberry Pi high definition (HD) NoIR Camera v2 is the official “night vision” camera board released by the Raspberry Pi Foundation which connects to any Raspberry Pi or Compute Module. The Raspberry Pi NoIR Camera Module v2 is a high quality 8 megapixel camera based around the Sony IM..
Rs.1,700.00
New
Model: PICOW
The Raspberry Pi Pico W offers a minimal yet flexible design for supporting the RP2040 microcontroller chip. It features external components such as a Winbond W25Q16JV flash memory, a crystal, power supplies and decoupling, and a USB connector. The majority of the RP2040's pins are accessible via us..
Rs.560.00
Model: R5V30AM
Relay 5V 30A 1 Channel Module with Optocoupler High Low Level TriggerThe relay module uses an authentic quality mechanical relay and the industry's top quality subminiature two-way isolation optical coupling which gives you the strong anti-interference ability, and stable performance.The user ..
Rs.175.00
Model: RF433
Features
Range in open space(Standard Conditions) : 100 Meters
RX Receiver Frequency : 433 MHz
RX Typical Sensitivity : 105 Dbm
RX Supply Current : 3.5 mA
RX IF Frequency : 1MHz
&nb..
Rs.63.00
Model: RC522
RFID RC522 Reader-Writer 13.56MHz SPI with Mifare Tags for Arduino Raspberry PI
Specifications:
Operating Current :13-26mA/DC 3.3V
Idle Current :10-13mA/DC 3.3V
Sleep Current: <80uA
Peak Current: <30mA
Operating Frequency: 13.56MHz
Supported card types: mifare1 S50、mifare1 S70, mifare..
Rs.69.00
Model: RFID125USB
This RFID card reader can read RFID card serial number and output to your computer according to the specified format, which may be used for any application including and not limited to food courts, gaming zone, shopping marts etcThe RFID card reader is simple, fast read card. Belong to standard HID ..
Rs.520.00
Model: MBoard
MBoard is a unique Arduino board which features onboard L298P motor driver to control 2/4 motors for wheeled robot , an XBee socket interface to connect xbee module for wireless communication, its also nRF24L01+ module interface for additional wireless option, Micro SD socket and an ATMega32U4. The ..
Rs.1,970.00
Out Of Stock
Model: HTHD-10
This is High torque heavy duty DC Gear Motor for bigger robots / motion systems. Drive shaft is supported from with metal bushes, it has sturdy design with gear box made to hold stall torque produced.
Specifications:
• 10 RPM 12V DC Motor With Gear Box.
• &nbs..
Rs.750.00
Model: RS232TTL
RS232 to TTL Serial Interface Module establish serial communication between TTL and RS232 ports. Connect with any microcontroller to convert the I/O pin for RS232 compatible device.These boards usually have a DB9 connector soldered at one end, and four header pins with jumper cables at the other end..
Rs.48.00
New
Model: SAHS01
These aluminum double servo arms have a length of 2.685”, a width of 0.25”, and utilize the 0.77” hub pattern that can connect directly to your C1 Hitec servo spline. If you need a sturdy arm for your project these are your ideal choice.Length - 2.685”Width - 0.25”C1 SplineHub Pattern - 0.77”Note : ..
Rs.1,100.00
New
Model: SASHS01
These aluminum single servo arms have a length of 1.53”, a width of 0.25”, and utilize the 0.77” hub pattern that can connect directly to your C1 Hitec servo spline. If you need a sturdy arm for your project these are your ideal choice.Length - 1.53”Width - 0.25”C1 SplineHub Pattern - 0.77”Note : Sc..
Rs.850.00