Out of Stock
Model: TB6560
TB6560 Stepper Driver 3A CNC Router 1-axis Controller has high-performance forward and reverse driving of a two-phase bipolar stepping motor using only a clock input signal. Suitable for 2-phase Nema 17 and Nema 23 stepper motor up to 3 Ampere current rating.Operating voltage :DC 10V-35VVery easy to..
Rs.385.00
Model: TB6600
TB6600 CNC Stepper Motor Driver 4.0A 9-42V ControllerTB6600 is an easy-to-use professional stepper motor driver, which could control a two-phase stepping motor. It is compatible with Arduino and other microcontrollers that can output a 5V digital pulse signalFEATURESSupport 8 kinds of current contro..
Rs.350.00
Model: TB6612
The TB6612FNG motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes - CW, CCW, short-brake, and stop. Widely used in experiment,industry,robot, electronic DIY etc.CW/CCW/s..
Rs.159.00
Model: TCRT5000
Using infrared reflective sensor TCRT5000
The detection distance: 1mm ~ 8mm apply focal distance of 2.5mm
The comparator output signal clean, good waveform, driving ability, more than 15mA
With a multi-turn precision potentiometer adjustable sensitivity adjustment
The working voltage of 3.3V..
Rs.60.00
2 weeks
Model: STCRT5000
TCRT5000L sensor is a reflective sensor which include an infrared emitter and phototransistor in a leaded package which blocks visible light.FeaturesDimensions (L x W x H in mm): 10.2 x 5.8 x 7.Peak operating distance: 2.5 mm.Operating range within > 20 % relative collector current: 0.2 mm to 15 ..
Rs.29.00
New
Model: TDS
Analog TDS Water Sensor Module for Water Quality detects the Total Dissolved Solids (TDS) levels in the water which can be used to indicate the water quality. The TDS Sensor can be applied in water quality applications such as TDS meter, drinking or potable water, well water, aquarium, hydroponics, ..
Rs.520.00
Out Of Stock
Model: teensy
The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. Each Teensy 3.2 comes pre-flashed with a bootloader so you can program it using the on-board USB connection: No external programmer needed! You can program for the Teensy in your favorite program..
Rs.2,650.00
Out Of Stock
Model: TM-APM
The Telemetry lets you see live data, such as live GPS position overlaid on a map, system voltage, heading, waypoint navigation even artificial horizon etc.
Features :
- MAVLink protocol framing status documents
- Frequency modulation and Spread Spectrum (FHSS)
- Self-adaption to time divisi..
Rs.1,660.00
Model: TP
Use this printer in any project where you need a hard-copy of the output.It has Low noise and direct thermal printing, detect the paper automatically with automatic memory printing facility.It support serial port(RS232C,TTL) with rich graphics/curve/text printing functionPrinter performancePri..
Rs.2,550.00
Model: tinker_mosfet
This module switches a high current load using a high power transistor. Unlike a mechanical relay, this is capable of high speed switching for use with PWM.
Input: This module lets you control devices operating at a maximun of 24VDC with an Arduino pin. To wire the module, connect the power supp..
Rs.950.00
Out of Stock
Model: PITFT3.5
Make your Human Interface Panel with Touch Screen 3.5 inch TFT LCD Display for Raspberry PiThis small 3.5-inch touch screen module is designed especially for Raspberry Pi, using the latest Linux Core system. This is ideal for DIY anywhere, anytime and does not require any separate power source ..
Rs.950.00
Out of Stock
Model: PID5IN
Touch Screen 5 Inch Display with HDMI for Raspberry PiThis TFT LCD Display for Raspberry Pi has 5″ size which features 800×480 pixel resolution. Getting the Pi onto the display board is easy enough!!! make use of stand-off screws included in this pack to put the Raspberry Pi on the display board. Bu..
Rs.2,250.00