TB6560 Stepper Driver 3A CNC Router 1-axis Controller

TB6560 Stepper Driver 3A CNC Router 1-axis Controller has high-performance forward and reverse driving of a two-phase bipolar stepping motor using only a clock input signal. Suitable for 2-phase Nema 17 and Nema 23 stepper motor up to 3 Ampere current rating.

Operating voltage :DC 10V-35V

Very easy to use, no instructions, all of use are marked on the board

With large heat sink to ensure good heat dissipation

Input signal high-speed opto-coupler isolation, guarantee not losing steps

Semi-flow mode adjustable, semi-flow current adjustable, not the general design on the market, with a variety of semi-flow model and semi-flow current setting function

Attenuation model adjusted for all the motors can be locked when no noise

Working voltage: DC 10V-35V.Recommend Switching Power Supply DC24V

6N137 high-speed Opto-Coupler , to ensure a high speed without step out.

New original Toshiba TB6560AHQ chip, low-voltage shutdown, of overheating parking and over-current protection circuit to ensure optimal performance.

Rated output: ± 3A ,peak 3.5A.

For 42,57,86 Stepper within 3A 2/4 -phase / 4 wire / 6 wire stepper motor, not fit for more than 3A stepper motor.

The Automatic half-decay adjustable.

Excitation Mode: synchronizing, half step, 1/8 step, 1/16 step, a maximum of 16 segments.

Volume: 50 x 75 x 35 ( MM)

The current level adjustable to meet your various application needs.

Thick tooth radiators, good heat dissipation.