DHT11 Temperature and Humidity Sensor Module for Environment sensing and monitoring, a high performance temperature and humidity sensor, ensuring high reliability and excellent stability.
The temperature is measured using a negative temperature coefficient thermistor (NTC), and the relative humid..
HTC1 HTC-1 Temperature Humidity Digital Thermo Hygrometer Meter with Clock is generally used for an incubator to monitor Real-time temperature and Humidity with daily Calender, clock and alarm system on one single large LCD screen display, features one-inch tall digital numbers which can be seen fro..
The LM35 series are precision integrated-circuit temperature sensors, whose output voltage is linearly proportional to the Celsius (Centigrade) temperature. The LM35 thus has an advantage over linear temperature sensors calibrated in ° Kelvin, as the user is not required to subtract a large constant..
MLX90614 Infrared Non-Contact Body Temperature Measurement Sensor Module can be used with any microcontroller that can communicate with it through it's I2C interfaceMultiple zone temperature control up to 127 sensors can be read via common 2 wiresApplication:Body temperature measurementIndustrial te..
PT100 Temperature Sensor Waterproof 1m 30mm Stainless Steel. You can immerse both the probe and the cable in the water for continuous operation. It also can be used with a thermal well.The PT100-S Waterproof 1m 30mm Stainless Steel Pole Probe Temperature Sensor has a water-immersible probe suitable ..
Voltage: DC 12VTemperature range: -20°C to 60°CTemperature range: 0% to 100%RHControl accuracy: 0.1°C, 0.1RHDetector probe: integrated sensorOutput type: relay outputOutput capacity: up to 10AWeight: about 69g (with sensor)Size: 65*55*28mm (length*width*height) How to control the humidity:Humid..
AM2301 DHT21 Temperature & Humidity Sensor - Capacitive Digital.Each AM2301/ DHT21 sensor is calibrated in an extremely accurate humidity calibration chamber. It uses dedicated digital module acquisition technology and temperature and humidity sensing technology to ensure high reliabi..
DHT11 output calibrated digital signal. It applys exclusive digital-signal-collecting-technique and humidity sensing technology, assuring its reliability and stability. Power supply: 3.3-5.5V DCOutput signal: digital signal via 1-wire busAccuracy: humidity +-5%RH, temperature +-2CelsiusResoluti..
3 to 5V power and I/O2.5mA max current use during conversion (while requesting data)Good for 0-100% humidity readings with 2-5% accuracyGood for -40 to 80°C temperature readings ±0.5°C accuracyNo more than 0.5 Hz sampling rate (once every 2 seconds)Body size 27mm x 59mm x 13.5mm (1.05" x 2.32" x 0.5..
DHT22 has higher precision and can replace the expensive imported SHT10 temperature and humidity sensor.It can measure the environment temperature and humidity to meet the high demand.The product has high reliability and good stability.If it's used and combined with special sensor Arduino expansion ..
The DS1620 is a complete digital thermometer on a chip, capable of replacing the normal combination of temperature sensor and analog-to-digital converter in most applications. It can measure temperature in units of 0.5° Centigrade (C) from -55° C to +125° C. (In Fahrenheit (°F), units of 0.9° F and ..
We use cookies to improve and personalize your browsing experience.By continuing to visit this website you agree to our use of cookies. Privacy Policy.